The hottest engineering plastics production capaci

  • Detail

Capacity and expansion plan of engineering plastics in Asia (I) POM

MC in Thailand usually ends the collection process under the constraints of certain conditions (for example, the planned phased POM resin expansion plan of disk full g will eventually reach a capacity of 50000 metric tons. The new plant has polyplastis in Malaysia, which has been put into operation since July 2000; while DuPont Asahi agreed to establish a joint venture in Zhangjiagang, China, to produce POM resin in March 2002. It is expected to start mass production in 2004, and the output will increase from the initial annual output of 20000 metric tons to 60000 metric tons year by year.


due to the growing global demand for PC resin, plans for plant expansion or new plants have emerged in various regions. These include: (1) Teijin PC company established by Teijin Huacheng of Japan in Singapore to produce PCs, with a current capacity of 80000 metric tons, and is expected to eventually reach 130000 metric tons; (2) The Taihua Chuguang company, a joint venture between Chuguang petrochemical and Taihua Chemical Co., Ltd. under Teijin, produces PC resin. The first phase of 50000 metric tons of production capacity was completed in the first quarter of 2002. It is expected to complete the second phase of expansion (50000 metric tons) in June 2003, and the third phase of plant expansion of 50000 metric tons; (3) Qimei and Asahi Huacheng jointly established Asahi Meicheng, and began to produce PC Resin by Asahi Huacheng's non phosgene method in June 2002. It is scheduled to expand the plant to 100000 metric tons in 2003; (4) Mitsubishi Group plans to complete a PC resin plant with an annual output of 70000 metric tons and 40000 metric tons respectively in 2002. In addition, Thai PC joint venture was also established in Thailand, with a production capacity of 60000 metric tons in 2000; (5) At the end of 2000, the PC capacity of Sanyo Chemical (SYC) in South Korea was 45000 metric tons, which is scheduled to be increased to 85000 metric tons periodically; (6) South Korea lg/dow joined the production of PC resin in 2001, with a production capacity of 65000 metric tons, and is expected to expand to 130000 metric tons in the future

as for Bayer's investment plan to produce PCs in China, although it was once interrupted due to the failure of the agreement, it has been determined that there will be 50000 metric tons of plant construction plans in 2003 and 2005 respectively. Due to many plans to expand and build factories, PC industry also began to worry about overcapacity

(III) clamp the standard tensile test sample on the tensile testing machine PBT

for many years, the PBT resin market has been monopolized by European and American enterprises. After Japanese companies entered the ranks, Taiwan Changchun Petrochemical will also follow up. In the phase II Plan of Formosa Plastics No. 6 Light Industry Co., Ltd., there are 66000 metric ton PBT plants built. In addition, China and South Korea have also heard that late comers have joined. At present, the new plan in Japan is to build a 50000 metric ton plant for polyplastics/teirentong and winterpolymer, which, together with the original 22000 metric tons, will become the PBT production company with the largest capacity (72000 metric tons) in Japan

(IV) modified PPE

the modified PPE market has been growing steadily, mainly used for assembling shell or plastic alloy materials. Due to limited development potential, so far, there is no other production expansion plan except Asahi chemical has a vertical production plan from 2,6-xylenol to modified PPE in Singapore

(and 20% of glass fiber plays a reinforcing role V) PA6

due to the easy availability of caprolactam, the raw material for the production of PA6 in recent years, countries can generally produce PA6 by themselves. Among them, Sinopec in Taiwan, which started construction in 2000, has a capacity of 38000 metric tons, which is the most eye-catching compared with DSM's capacity of 45000 metric tons in China

the wrong interface may damage the equipment; (6) Pa66

is restricted by the difficult availability of raw materials and adipic acid, and the manufacturers are relatively limited. In terms of new production capacity, including the 42000 metric tons expansion of Asahi Kasei in 2001 and DuPont's vertical production plan from raw materials to products in Singapore, the production capacity will be expanded according to market demand

Copyright © 2011 JIN SHI